1-800-458-9318
Open Cart: $0.00
No items added.
Navigation
Brands

IDC Select

Display per page
View as

1VP068-1-1/8, VARIABLE PITCH SHEAVE

1VP068-1-1/8, VARIABLE PITCH SHEAVE
SKU Part No: 1VP068-1-1/8 IDC
Manufacturer Part No: IDC 1VP068-1-1/8
In-Stock Quantity: 34 in stock
Price:

Description

IDC 1VP068-1-1/8

IDC Select Single-Groove Variable-Pitch Sheave

Use with "3L," "4L," "5L," "A," "B" or "5V" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 1VP068118 IDC, IDC 1VP068118
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1-1/8
Type1
Outside Diameter (in)6.55
Diameter Range 3L Belt (in)Min 5.10 / Max 5.90
Diameter Range 4L or A Belt (in)Min 5.20 / Max 6.20
Diameter Range 5L or B Belt (in)Min 5.50 / Max 6.50
Diameter Range 5V Belt (in)Min 5.90 / Max 6.90
F Min0.75
F Max1.13
G Min0.5
G Max0.88
Length through Bore Dim. L (in)2
Stock Bores (in)5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8
CommentUse with 3L, 4L, 5L, A, B and 5V Belts

2AK041-3/4, BORED TO SIZE SHEAVE

2AK041-3/4, BORED TO SIZE SHEAVE
SKU Part No: 2AK041-3/4 IDC
Manufacturer Part No: IDC 2AK041-3/4
In-Stock Quantity: 1 in stock
Price:

Description

IDC 2AK041-3/4

IDC Select Bored-to-Size Sheave

Use with "3L," "4L" & "A" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 2AK04134 IDC, IDC 2AK04134
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)3/4
Outside Diameter (in)3.95
Pitch Diameter with 3L Belt (in)3.36
Pitch Diameter with 4L or A Belt (in)3.70
Type2
Face Width Dim. F (in)1-3/8
Length Through Bore Dim. L (in)1-11/32
Hub Extension Dim. P (in)15/32
Hub Inset Dim. C (in)1/2
Stock Bores Available5/8, 3/4, 7/8, 1, 1-1/8
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

RABR-12, RUBBER MOUNTED CARTRIDGE UNIT

RABR-12, RUBBER MOUNTED CARTRIDGE UNIT ECCENTRIC LOCKING
SKU Part No: RABR-12 IDC
Manufacturer Part No: IDC RABR-12
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC RABR-12

IDC Select Rubber-Mounted Cartridge Unit

Eccentric Locking Collar Design

Features

  • Narrow Inner Ring Bearing
  • Eccentric Locking Collar
  • Conductive Rubber Interliner to Dissipate Static and Reduce Noise and Vibration
  • Spherical OD

Alternative Part Numbers: IDCRABR12, RABR12IDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Shaft Diameter Dim.d (in)3/4
Outer Diameter Dim. A (in)2-1/16
Rubber Interliner Width Dim. B (in)11/16
Overall Width (in)1.2887
Collar OD Dim. K (in)1-1/4
Locking DeviceEccentric Collar
Bearing P/NSA204-12
Weight (lbs).37

HCF209-27, 4-BOLT FLANGE UNIT

HCF209-27, 4-BOLT FLANGE UNIT ECCENTRIC COLLAR
SKU Part No: HCF209-27 IDC
Manufacturer Part No: IDC HCF209-27
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC HCF209-27

IDC Select Standard Duty 4-Bolt Flange Bearing

Eccentric Collar Locking Design

Features

  • Cast Iron Housing
  • Wide Inner Ring Bearing
  • Dual Heavy Duty Slinger Type Contact Seals
  • Eccentric Locking Collar
  • Self-Aligning

Alternative Part Numbers: IDCHCF20927, HCF20927IDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Shaft diameter Dim. d (in) (fract)1-11/16
Shaft diameter Dim. d (mm)42.8625
Housing length Dim. L (in) (fract)5-5/16
Housing length Dim. L (mm)135
Mounting hole center-to-center Dim. J (in) (fract)4-9/64
Mounting hole center-to-center Dim. J (mm)105
Mounting base to bearing center Dim. A2 (in) (fract)15/16
Mounting base to bearing center Dim. A2 (mm)24
Housing base thickness Dim. A1 (in) (fract)23/32
Housing base thickness Dim. A1 (mm)18
Flange height Dim. A (in)1-37/64
Flange height Dim. A (mm)40
Mounting hole diameter Dim. N (in) (fract)5/8
Mounting hole diameter Dim. N (mm)16
Flange assembly height Dim. E (in) (fract)2-5/16
Flange assembly height Dim. E (mm)58.9
Bearing inner race width - short side Dim. S (in)0.8425
Bearing inner race width - short side Dim. S (mm)21.4
Bolt Size (in)1/2
Bolt Size (mm)M14
Insert No.HC209-27
Housing No.FU209
Weight (lb)5.00
Weight (kg)2.27
Basic Dynamic Load Rating (Cr) lbs7103.96
Basic Dynamic Load Rating (Cr) kN31.6
Basic Static Load Rating (Cor) lbs4631.06
Basic Static Load Rating (Cor) kN20.6
Locking DeviceEccentric Locking Collar
Grease Fitting1/8-27 NPT

2525-1, TAPERLOCK BUSHING

2525-1, TAPERLOCK BUSHING
SKU Part No: 2525-1 IDC
Manufacturer Part No: IDC 2525-1
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC 2525-1

IDC Select Taper Bushing

ANSI Standard Design

Features

  • Flush Mount - Clean and Compact
  • Easy Installation and Dismount
  • 8-Degree Taper - Fits Equivalent to Shrink Fit
  • Globally Accepted
  • 1/2" to 5" and Metric Bores Available
  • Keystock Provided with Shallow Key Sizes

Alternative Part Numbers: 25251IDC, IDC25251
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore1"
Bushing Keyseat1/4 X 1/8
Major Diameter Dim. A (in)3-3/8
Length Through Bore Dim. B (in)2-1/2
Bolt Circle Dim. D (in)3-1/4
Screw Size Dim. F (in)1/2
Recommended Wrench Torque (lb-in)422
Weight (lb)4.4

4545-4-7/16, TAPERLOCK BUSHING

4545-4-7/16, TAPERLOCK BUSHING SHALLOW KEY (MM 25.4 x 19.05 x 114.3) (INCH 1 X 3/4 X 4-1/2)
SKU Part No: 4545-4-7/16 IDC
Manufacturer Part No: IDC 4545-4-7/16
In-Stock Quantity: 4 in stock
Price:

Description

IDC 4545-4-7/16

IDC Select Taper Bushing

ANSI Standard Design

Features

  • Flush Mount - Clean and Compact
  • Easy Installation and Dismount
  • 8-Degree Taper - Fits Equivalent to Shrink Fit
  • Globally Accepted
  • 1/2" to 5" and Metric Bores Available
  • Keystock Provided with Shallow Key Sizes

Alternative Part Numbers: 45454716IDC, IDC45454716
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore4-7/16"
Bushing Keyseat1 X 1/4
Major Diameter Dim. A (in)6-3/8
Length Through Bore Dim. B (in)4-1/2
Bolt Circle Dim. D (in)6.13
Screw Size Dim. F (in)3/4
Recommended Wrench Torque (lb-in)2380
Weight (lb)15.4

SAPP206-19, STAMPED HOUSING PILLOW BLOCK

SAPP206-19, STAMPED HOUSING PILLOW BLOCK W/ECCENTRIC COLLAR
SKU Part No: SAPP206-19 IDC
Manufacturer Part No: IDC SAPP206-19
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC SAPP206-19

IDC Select Pressed Steel Pillow Block

Eccentric Locking Collar Design

Features

  • Lightweight Unit for Applications with Low Speed and Light Load
  • Narrow Inner Ring Bearing
  • Full-Cover Metal Shroud Seals
  • Zinc-Plated Housing
  • Eccentric Locking Collar

Alternative Part Numbers: IDCSAPP20619, SAPP20619IDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Shaft Diameter Dim. d (in)1-3/16
Shaft Height Dim. H (in)1-5/16
Shaft Height Dim. H (mm)33.3
Housing Length Dim. L (in)4-39/64
Housing Length Dim. L (mm)117
Mounting Hole Center-to-Center Dim. J (in)3-47/64
Mounting Hole Center-to-Center Dim. J (mm)95
Housing Width Dim. A (in)1-1/2
Housing Width Dim. A (mm)38
Mounting Hole Diameter Dim. N (in)29/64
Mounting Hole Diameter Dim. N (mm)11.5
Housing Base Thickness Dim. H1 (in)0.157
Housing Base Thickness Dim. H1 (mm)4
Housing Height Dim. H0 (in)2-39/64
Housing Height Dim. H0 (mm)66.3
Inner Race Extension Dim. B (in)1.41
Inner Race Extension Dim. B (mm)35.7
Bearing Inner Race Width - Short Side Dim. S (in)0.35
Bearing Inner Race Width - Short Side Dim. S (mm)9
Bolt Size (in)3/8
Insert No.SA206-19
Weight (lb)1.1
Weight (kg)0.5
Locking DeviceEccentric

4C095E, QD STYLE SHEAVE

4C095E, QD STYLE SHEAVE
SKU Part No: 4C095E IDC
Manufacturer Part No: IDC 4C095E
In-Stock Quantity: 10 in stock
Price:

Description

IDC 4C095E

IDC Select QD-Style Sheave

Use with "C" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Accepts "QD" Style Bushings
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 4C095E IDC, IDC 4C095E
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Number of Grooves4
Outside Diameter (in)9.9
Pitch Diameter (in)9.5
TypeA-1
Bushing RequiredE
Face Width Dim. F (in)4-3/8
Rim/Hub Offset Dim. K (in)2
Hub Length Dim. L (in)2-3/4
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged
CommentUse Custom