1-800-458-9318
My Account
You have no items in your Shopping Cart.
Shopping Cart
Open Cart: $0.00
No items added.
Menu
Menu
Navigation
Keyword Search
Categories
Brands

IDC Select

Display per page
View as

SBLF202-10G, 2-HOLE FLANGE UNIT

Picture of SBLF202-10G, 2-HOLE FLANGE UNIT
SBLF202-10G, 2-HOLE FLANGE UNIT SETSCREWS
SKU Part No: SBLF202-10G IDC
Manufacturer Part No: IDC SBLF202-10G
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC SBLF202-10G

IDC Select Light-Duty 2-Bolt Flange

Set Screw Locking Design

Features

  • One-Piece Cast Iron Housing
  • Narrow Inner Ring Bearing
  • Full-Cover Metal Shroud Seals
  • Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
  • Fully Self-Aligning

Alternative Part Numbers: IDCSBLF20210G, SBLF20210GIDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Shaft diameter Dim. d (in)0.6250
Shaft diameter Dim. d (in) (fract)5/8
Shaft diameter Dim. d (mm)15.875
Housing length Dim. H (in)3.1890
Housing length Dim. H (in) (fract)3-3/16
Housing length Dim. H (mm)N/A
Mounting hole center-to-center Dim. J (in)2.5000
Mounting hole center-to-center Dim. J (in) (fract)2-1/2
Mounting hole center-to-center Dim. J (mm)63.5
Housing width Dim. L (in)2.2047
Housing width Dim. L (in) (fract)2-7/32
Housing width Dim. L (mm)56
Mounting base to bearing center Dim. A2 (in)0.3740
Mounting base to bearing center Dim. A2 (in) (fract)3/8
Mounting base to bearing center Dim. A2 (mm)9.5
Flange height Dim. A (in)0.7087
Flange height Dim. A (in) (fract)23/32
Flange height Dim. A (mm)18
Housing base thickness Dim. A1 (in)0.3740
Housing base thickness Dim. A1 (in) (fract)3/8
Housing base thickness Dim. A1 (mm)9.5
Mounting hole diameter Dim. N (in)0.3150
Mounting hole diameter Dim. N (in) (fract)5/16
Mounting hole diameter Dim. N (mm)8
Bearing inner race width - short side Dim. S (in)0.2362
Bearing inner race width - short side Dim. S (in) (fract)1/4
Bearing inner race width - short side Dim. S (mm)6.0
Flange assembly height Dim. E (in)0.9961
Flange assembly height Dim. E (in) (fract)1
Flange assembly height Dim. E (mm)25.5
Bolt Size (in)1/4
Bolt Size (mm)M6
Insert No.SB202-10G
Weight (lb)0.57
Weight (kg)0.259
Basic Dynamic Load Rating (Cr) lbs2158.17
Basic Dynamic Load Rating (Cr) kN9.6
Basic Static Load Rating (Cor) lbs1034.12
Basic Static Load Rating (Cor) kN4.6
Grease Fitting1/4-28 UNF

UCST208-25, TAKE UP UNIT-WIDE SLOT

Picture of UCST208-25, TAKE UP UNIT-WIDE SLOT
UCST208-25, TAKE UP UNIT-WIDE SLOT SETSCREWS
SKU Part No: UCST208-25 IDC
Manufacturer Part No: IDC UCST208-25
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC UCST208-25

IDC Select Standard Duty Take-Up

Set Screw Locking Design

Features

  • One-Piece Cast Iron Housing
  • Wide Slot
  • Wide Inner Ring Bearing
  • Dual Heavy-Duty Slinger-Type Contact Seals
  • Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
  • Fully Self-Aligning

Alternative Part Numbers: IDCUCST20825, UCST20825IDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Shaft Diameter Dim. d (in)1.5625
Shaft Diameter Dim. d (in) (fract)1-9/16
Shaft Diameter Dim. d (mm)39.6875
Open Hole Width Dim. N1 (in)0.7480
Open Hole Width Dim. N1 (in) (fract)3/4
Open Hole Width Dim. N1 (mm)19
Housing Web Thickness Dim. L2 (in)0.6299
Housing Web Thickness Dim. L2 (in) (fract)5/8
Housing Web Thickness Dim. L2 (mm)16
Housing Neck Dim. H2 (in)3.2677
Housing Neck Dim. H2 (in) (fract)3-17/64
Housing Neck Dim. H2 (mm)83
Open Hole Length Dim. N2 (in)1.9291
Open Hole Length Dim. N2 (in) (fract)1-15/16
Open Hole Length Dim. N2 (mm)49
Mounting Hole Diameter Dim. N (in)1.1417
Mounting Hole Diameter Dim. N (in) (fract)1-9/64
Mounting Hole Diameter Dim. N (mm)29
Housing Width Dim. L3 (in)3.2677
Housing Width Dim. L3 (in) (fract)3-17/64
Housing Width Dim. L3 (mm)83
Slot Width Dim. A1 (in)0.6890
Slot Width Dim. A1 (in) (fract)11/16
Slot Width Dim. A1 (mm)17.5
Slot-to-Slot Distance Dim. H1 (in)4.0157
Slot-to-Slot Distance Dim. H1 (in) (fract)4-1/64
Slot-to-Slot Distance Dim. H1 (mm)102
Housing Length Dim. H (in)4.4882
Housing Length Dim. H (in) (fract)4-31/64
Housing Length Dim. H (mm)114
Housing Height Dim. L (in)5.6693
Housing Height Dim. L (in) (fract)5-43/64
Housing Height Dim. L (mm)144
Housing Neck Diameter Dim. A (in)1.9291
Housing Neck Diameter Dim. A (in) (fract)1-15/16
Housing Neck Diameter Dim. A (mm)49
Mounting Base to Bearing Center Dim. L1 (in)3.5039
Mounting Base to Bearing Center Dim. L1 (in) (fract)3-1/2
Mounting Base to Bearing Center Dim. L1 (mm)89
Flange Assembly Height Dim. B (in)1.9370
Flange Assembly Height Dim. B (mm)49.2
Bearing Inner Race Width - Short Side Dim. S (in)0.7480
Bearing Inner Race Width - Short Side Dim. S (mm)19
Insert No.UC208-25
Weight (lb)5.31
Weight (kg)2.41
Basic Dynamic Load Rating (Cr) lbs6631.86
Basic Dynamic Load Rating (Cr) kN29.5
Basic Static Load Rating (Cor) lbs4069.04
Basic Static Load Rating (Cor) kN18.1
Locking DeviceSet Screw

1VP062-1-1/4, VARIABLE PITCH SHEAVE

Picture of 1VP062-1-1/4, VARIABLE PITCH SHEAVE
1VP062-1-1/4, VARIABLE PITCH SHEAVE
SKU Part No: 1VP062-1-1/4 IDC
Manufacturer Part No: IDC 1VP062-1-1/4
In-Stock Quantity: 1 in stock
Price:

Description

IDC 1VP062-1-1/4

IDC Select Single-Groove Variable-Pitch Sheave

Use with "3L," "4L," "5L," "A," "B" or "5V" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 1VP062114 IDC, IDC 1VP062114
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1-1/4
Type1
Outside Diameter (in)5.95
Diameter Range 3L Belt (in)Min 4.50 / Max 5.30
Diameter Range 4L or A Belt (in)Min 4.60 / Max 5.30
Diameter Range 5L or B Belt (in)Min 4.90 / Max 5.90
Diameter Range 5V Belt (in)Min 5.30 / Max 6.30
F Min0.75
F Max1.13
G Min0.5
G Max0.88
Length through Bore Dim. L (in)2
Stock Bores (in)5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8
CommentUse with 3L, 4L, 5L, A, B and 5V Belts

AK074-1-3/16, BORED TO SIZE SHEAVE

Picture of AK074-1-3/16, BORED TO SIZE SHEAVE
AK074-1-3/16, BORED TO SIZE SHEAVE
SKU Part No: AK074-1-3/16 IDC
Manufacturer Part No: IDC AK074-1-3/16
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC AK074-1-3/16

IDC Select Bored-to-Size Sheave

Use with "3L," "4L" & "A" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: AK0741316 IDC, IDC AK0741316
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1-3/16
Outside Diameter (in)7.25
Pitch Diameter with 3L Belt (in)6.66
Pitch Diameter with 4L or A Belt (in)7
Type3
Face Width Dim. F (in)3/4
Length Through Bore Dim. L (in)1-15/32
Hub Extension Dim. P (in)23/32
Hub Inset Dim. C (in)0
Stock Bores Available1/2, 5/8, 3/4, 15/16, 1, 1-1/8, 1-3/16, 1-1/4, 1-7/16
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

2BK070-1, BORED TO SIZE SHEAVE

Picture of 2BK070-1, BORED TO SIZE SHEAVE
2BK070-1, BORED TO SIZE SHEAVE
SKU Part No: 2BK070-1 IDC
Manufacturer Part No: IDC 2BK070-1
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC 2BK070-1

IDC Select Bored-to-Size Sheave

Use with "4L" or "A" Belts and "5L" or "B" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Setscrews
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 2BK0701 IDC, IDC 2BK0701
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1
Outside Diameter (in)6.75
Pitch Diameter with 4L Belt (in)6
Pitch Diameter with 5L or B Belt (in)6.4
Type3
Face Width Dim. F (in)1-3/4
Length Through Bore Dim. L (in)1-19/32
Hub Extension Dim. P (in)11/32
Hub Inset Dim. C (in)1/2
Stock Bores Available3/4, 1, 1-1/8, 1-3/16, 1-3/8, 1-7/16
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

1310-1/2, TAPERLOCK BUSHING

Picture of 1310-1/2, TAPERLOCK BUSHING
1310-1/2, TAPERLOCK BUSHING
SKU Part No: 1310-1/2 IDC
Manufacturer Part No: IDC 1310-1/2
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC 1310-1/2

IDC Select Taper Bushing

ANSI Standard Design

Features

  • Flush Mount - Clean and Compact
  • Easy Installation and Dismount
  • 8-Degree Taper - Fits Equivalent to Shrink Fit
  • Globally Accepted
  • 1/2" to 5" and Metric Bores Available
  • Keystock Provided with Shallow Key Sizes

Alternative Part Numbers: 131012IDC, IDC131012
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore1/2"
Bushing Keyseat1/8 X 1/16
Major Diameter Dim. A (in)2
Length Through Bore Dim. B (in)1
Bolt Circle Dim. D (in)1-7/8
Screw Size Dim. F (in)3/8
Recommended Wrench Torque (lb-in)176
Weight (lb)0.7

BK160-1, BORED TO SIZE SHEAVE

Picture of BK160-1, BORED TO SIZE SHEAVE
BK160-1, BORED TO SIZE SHEAVE
SKU Part No: BK160-1 IDC
Manufacturer Part No: IDC BK160-1
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC BK160-1

IDC Select Bored-to-Size Sheave

Use with "4L" or "A" Belts and "5L" or "B" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Setscrews
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: BK1601 IDC, IDC BK1601
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1
Outside Diameter (in)15.75
Pitch Diameter with 4L Belt (in)15
Pitch Diameter with 5L or B Belt (in)15.4
Type3
Face Width Dim. F (in)7/8
Length Through Bore Dim. L (in)1-15/32
Hub Extension Dim. P (in)21/32
Hub Inset Dim. C (in)1/16
Stock Bores Available1, 1-1/8, 1-3/16, 1-1/4, 1-7/16
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

C2100-1R, ROLLER CHAIN 10'

Picture of C2100-1R, ROLLER CHAIN 10'
C2100-1R, ROLLER CHAIN 10' DOUBLE PITCH
SKU Part No: C2100-1R IDC
Manufacturer Part No: IDC C2100-1R
In-Stock Quantity: 20 in stock
Price:

Description

IDC C2100-1R

Designed for Light- to Medium-Duty Material-Handling Applications

Rollers Available in Standard and Oversized Diameters to Provide Either Sliding or Rolling Features

Features

  • Riveted Pins with Cottered Connecting Links
  • H Version Designates Heavy Plates
  • C2000 Series is Standard Roller Diameter
  • C2002 Series is Oversized Roller Diameter
  • Offset Links Available
  • Manufactured to ASME B29.100 Standards

Alternative Part Numbers: C21001RIDC, IDCC21001R
Unit of Measure: FT
Package Quantity: 10

Catalog Page

IDC Select Chain & Sprocket Catalog

Product Attributes

DescriptionROLLER CHAIN 10'
DescriptionDOUBLE PITCH
Dim. P Pitch (in)2.5
Dim. d1 Roller Diameter max (in)0.75
Dim. b1 Width Between Inner Plates (in)0.74
Dim. d2 Pin Diameter max (in)0.38
Dim. L Pin Length max (in)1.59
Dim. Lc Pin Length max (in)1.76
Dim. h2 Inner Plate Depth max (in)1.18
Dim. T Plate Thickness max (in)0.16
Dim. Q Ultimate Tensile Strength (lb)20114
Dim. Qo Average Tensile Strength (lb)23321.49
Weight per unit (lb)3.2
Selling unit of MeasureFT

6205 2RS-7/8, SPECIAL BORE BEARING

Picture of 6205 2RS-7/8, SPECIAL BORE BEARING
6205 2RS-7/8, SPECIAL BORE BEARING
SKU Part No: 6205 2RS-7/8 IDC
Manufacturer Part No: IDC 6205 2RS-7/8
In-Stock Quantity: 116 in stock
Price:

Description

IDC 6205 2RS-7/8

6200 Series Radial Ball Bearing

Sealed Light Duty Special - 7/8" Bore

Features

  • Sealed for Life
  • PolyRex EM Lubricant
  • Electric Motor Quality Bearing
  • C3 Radial Internal Clearance
  • ABEC 1 Precision

Alternative Part Numbers: IDC62052RS78, 62052RS78IDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore d7/8"
OD D (mm)52
Width B (mm)15
Basic Dynamic Load Rating (lb)3150
Basic Static Load Rating (lb)1770
Speed Rating Grease RPM10500
Speed Rating Oil RPMN/A
Weight (lb)0.28
Closure2 Rubber Seals
LubricantMobil Polyrex EM or Chevron SRI #2
MaterialSAE-52100 Chromium Steel

1215-11/16, TAPERLOCK BUSHING

Picture of 1215-11/16, TAPERLOCK BUSHING
1215-11/16, TAPERLOCK BUSHING
SKU Part No: 1215-11/16 IDC
Manufacturer Part No: IDC 1215-11/16
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC 1215-11/16

IDC Select Taper Bushing

ANSI Standard Design

Features

  • Flush Mount - Clean and Compact
  • Easy Installation and Dismount
  • 8-Degree Taper - Fits Equivalent to Shrink Fit
  • Globally Accepted
  • 1/2" to 5" and Metric Bores Available
  • Keystock Provided with Shallow Key Sizes

Alternative Part Numbers: 12151116IDC, IDC12151116
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore11/16"
Bushing Keyseat3/16 X 3/32
Major Diameter Dim. A (in)1-7/8
Length Through Bore Dim. B (in)1-1/2
Bolt Circle Dim. D (in)1-3/4
Screw Size Dim. F (in)3/8
Recommended Wrench Torque (lb-in)176
Weight (lb)0.8

1VP060-5/8, VARIABLE PITCH SHEAVE

Picture of 1VP060-5/8, VARIABLE PITCH SHEAVE
1VP060-5/8, VARIABLE PITCH SHEAVE
SKU Part No: 1VP060-5/8 IDC
Manufacturer Part No: IDC 1VP060-5/8
In-Stock Quantity: 12 in stock
Price:

Description

IDC 1VP060-5/8

IDC Select Single-Groove Variable-Pitch Sheave

Use with "3L," "4L," "5L," "A," "B" or "5V" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 1VP06058 IDC, IDC 1VP06058
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)5/8
Type1
Outside Diameter (in)6
Diameter Range 3L Belt (in)Not Recommended
Diameter Range 4L or A Belt (in)Min 4.20 / Max 5.20
Diameter Range 5L or B Belt (in)Min 4.30 / Max 5.50
Diameter Range 5V Belt (in)Not Recommended
F Min0.88
F Max1.25
G Min0.66
G Max1.031
Length through Bore Dim. L (in)2.16
Stock Bores (in)5/8, 3/4, 7/8, 1-1/8, 1-3/8, 1-5/8
CommentUse with 4L, 5L, A, and B Belts

AK046-1-1/8, BORED TO SIZE SHEAVE

Picture of AK046-1-1/8, BORED TO SIZE SHEAVE
AK046-1-1/8, BORED TO SIZE SHEAVE
SKU Part No: AK046-1-1/8 IDC
Manufacturer Part No: IDC AK046-1-1/8
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC AK046-1-1/8

IDC Select Bored-to-Size Sheave

Use with "3L," "4L" & "A" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: AK046118 IDC, IDC AK046118
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1-1/8
Outside Diameter (in)4.45
Pitch Diameter with 3L Belt (in)3.86
Pitch Diameter with 4L or A Belt (in)4.2
Type3
Face Width Dim. F (in)3/4
Length Through Bore Dim. L (in)1-5/32
Hub Extension Dim. P (in)15/32
Hub Inset Dim. C (in)1/16
Stock Bores Available1/2, 5/8, 3/4, 7/8, 15/16, 1, 1-1/8
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

C2040HP-OL, OFFSET LINK

Picture of C2040HP-OL, OFFSET LINK
C2040HP-OL, OFFSET LINK
SKU Part No: C2040HP-OL IDC
Manufacturer Part No: IDC C2040HP-OL
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC C2040HP-OL

IDC Select Hollow Pin Conveyor Chain

Manufactured to ANSI/ASME B29.27 Standards

Features

  • Cross Rods Can be Installed at Every Link Without Disassembly
  • ANSI Single- and Double-Pitch Chains Available

Alternative Part Numbers: C2040HPOLIDC, IDCC2040HPOL
Unit of Measure: EA
Package Quantity: 1

Catalog Page

IDC Select Chain & Sprocket Catalog

Product Attributes

DescriptionOFFSET LINK
Dim. P Pitch (in)1
Dim. d1 Bushing Diameter max (in)0.31
Dim. b1 Width Between Inner Plates (in)0.31
Dim. d2 Pin Diameter max (in)0.22
Dim. d3 Pin Diameter min (in)0.16
Dim. L Pin Length max (in)0.65
Dim Lc Pin Length max (in)0.69
Dim. h2 Inner Plate Depth max (in)0.47
Dim. T Plate Thickness max (in)0.06
Dim. Q Ultimate Tensile Strength (lb)2500
Dim. Qo Average Tensile Strength (lb)2864.04
Weight per unit (lb)0.01
Selling Unit of measureEA

A2060NP-1OL, OFFSET LINK

Picture of A2060NP-1OL, OFFSET LINK
A2060NP-1OL, OFFSET LINK NICKEL PLATED (50)
SKU Part No: A2060NP-1OL IDC
Manufacturer Part No: IDC A2060NP-1OL
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC A2060NP-1OL

Designed for Light Duty Drive Applications

Figure 8 Sidebars

Features

  • Riveted Pins
  • Offset Links Available
  • Manufactured to ASME B29.100 Standards

Alternative Part Numbers: A2060NP1OLIDC, IDCA2060NP1OL
Unit of Measure: EA
Package Quantity: 1

Catalog Page

IDC Select Chain & Sprocket Catalog

Product Attributes

DescriptionOFFSET LINK
DescriptionNICKEL PLATED
Dim. P Pitch (in)1.5
Dim. d1 Roller Diameter max (in)0.47
Dim. b1 Width Between Inner Plates (in)0.49
Dim. d2 Pin Diameter max (in)0.23
Dim. L Pin Length max (in)1.02
Dim. Lc Pin Length max (in)1.09
Dim. h2 Inner Plate Depth max (in)0.71
Dim. T Plate Thickness max (in)0.1
Dim. Q Ultimate Tensile Strength (lb)7227
Dim. Qo Average Tensile Strength (lb)8364.82
Weight per unit (lb)0.01
Selling unit of MeasureEA

SC293S, 2-15/16" 1PC SPLIT COLLAR

Picture of SC293S, 2-15/16" 1PC SPLIT COLLAR
SC293S, 2-15/16" 1PC SPLIT COLLAR
SKU Part No: SC293S IDC
Manufacturer Part No: IDC SC293S
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC SC293S

IDC Select 1-Piece Split Collar

Black Oxide Steel

Features

  • Shaft Collar Design Fully Engages the Shaft
  • Effective on Hard and Soft Shafts
  • Shaft Collars Are Also Available in Two-Piece, Zinc-Plated Solid Set Screw and Stainless Steel

Alternative Part Numbers: SC293SIDC, IDCSC293S
Unit of Measure: EA
Package Quantity: 1

Catalog

Product Attributes

Description2 15/16" ID SPLIT
Additional DescriptionClamp Collar, STL, Black Oxide
Bore (inches)2.9375
OD (inches)4.25
Width (inches)0.875
Screw Size3/8-24 X 1
item_weight (OZ)28

UCFL217-52, 2-BOLT FLANGE UNIT

Picture of UCFL217-52, 2-BOLT FLANGE UNIT
UCFL217-52, 2-BOLT FLANGE UNIT SETSCREWS
SKU Part No: UCFL217-52 IDC
Manufacturer Part No: IDC UCFL217-52
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC UCFL217-52

IDC Select Standard-Duty 2-Bolt Flange

Set Screw Locking Design

Features

  • One-Piece Cast Iron Housing
  • Wide Inner Ring Bearing
  • Dual Heavy-Duty Slinger-Type Contact Seals
  • Cup Point Set Screws 120º Apart Lock Unit Securely to Shaft
  • Fully Self-Aligning


Alternative Part Numbers: IDCUCFL21752, UCFL21752IDC
Unit of Measure: EA
Package Quantity: 1

 

Product Attributes

Shaft Diameter Dim. d (in)3.25
Shaft Diameter Dim. d (in) (fract)3-1/4
Shaft Diameter Dim. d (mm)82.55
Housing Length Dim. H (in)12.0079
Housing Length Dim. H (in) (fract)12
Housing Length Dim. H (mm)305
Mounting Hole Center-to-Center Dim. J (in)9.7638
Mounting Hole Center-to-Center Dim. J (in) (fract)9-49/64
Mounting Hole Center-to-Center Dim. J (mm)248
Housing Base Thickness Dim. A2 (in)1.4173
Housing Base Thickness Dim. A2 (in) (fract)1-27/64
Housing Base Thickness Dim. A2 (mm)36
Mounting Base to Bearing Center Dim. A1 (in)0.9449
Mounting Base to Bearing Center Dim. A1 (in) (fract)15/16
Mounting Base to Bearing Center Dim. A1 (mm)24
Mounting Hole Diameter Dim. N (in)0.9843
Mounting Hole Diameter Dim. N (in) (fract)63/64
Mounting Hole Diameter Dim. N (mm)25
Flange Height Dim. A (in)2.4803
Flange Height Dim. A (in) (fract)2-15/32
Flange Height Dim. A (mm)63
Housing Width Dim. L (in)7.4803
Housing Width Dim. L (in) (fract)7-15/32
Housing Width Dim. L (mm)190
Flange Assembly Height Dim. E (in)3.4488
Flange Assembly Height Dim. E (in) (fract)3-7/16
Flange Assembly Height Dim. E (mm)87.6
Bearing Inner Race Width - Short Side Dim. S (in)1.3425
Bearing Inner Race Width - Short Side Dim. S (mm)34.1
Bolt Size (in)7/8
Bolt Size (mm)M22
Insert No.UC217-52
Weight (lb)19.47
Weight (kg)8.83
Basic Dynamic Load Rating (Cr) lbs18771.55
Basic Dynamic Load Rating (Cr) kN83.5
Basic Static Load Rating (Cor) lbs14387.77
Basic Static Load Rating (Cor) kN64
Locking DeviceSet Screw
Grease Fitting1/8-27 NPT

1VP071-3/4, VARIABLE PITCH SHEAVE

Picture of 1VP071-3/4, VARIABLE PITCH SHEAVE
1VP071-3/4, VARIABLE PITCH SHEAVE
SKU Part No: 1VP071-3/4 IDC
Manufacturer Part No: IDC 1VP071-3/4
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC 1VP071-3/4

IDC Select Single-Groove Variable-Pitch Sheave

Use with "3L," "4L," "5L," "A," "B" or "5V" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: 1VP07134 IDC, IDC 1VP07134
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)3/4
Type1
Outside Diameter (in)7.1
Diameter Range 3L Belt (in)Not Recommended
Diameter Range 4L or A Belt (in)Min 5.30 / Max 6.30
Diameter Range 5L or B Belt (in)Min 5.40 / Max 6.60
Diameter Range 5V Belt (in)Min 5.80 / Max 6.60
F Min0.88
F Max1.25
G Min0.66
G Max1.03
Length through Bore Dim. L (in)2.16
Stock Bores (in)3/4, 7/8, 1-1/8, 1-3/8, 1-5/8
CommentUse with 4L, 5L, A, B and 5V Belts

AK184-1, BORED TO SIZE SHEAVE

Picture of AK184-1, BORED TO SIZE SHEAVE
AK184-1, BORED TO SIZE SHEAVE
SKU Part No: AK184-1 IDC
Manufacturer Part No: IDC AK184-1
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC AK184-1

IDC Select Bored-to-Size Sheave

Use with "3L," "4L" & "A" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: AK1841 IDC, IDC AK1841
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1
Outside Diameter (in)18.25
Pitch Diameter with 3L Belt (in)17.66
Pitch Diameter with 4L or A Belt (in)18
Type3
Face Width Dim. F (in)3/4
Length Through Bore Dim. L (in)1-15/32
Hub Extension Dim. P (in)23/32
Hub Inset Dim. C (in)0
Stock Bores Available3/4, 1, 1-3/16, 1-7/16
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

C2082HP, HOLLOW PIN CHAIN 10'

Picture of C2082HP, HOLLOW PIN CHAIN 10'
C2082HP, HOLLOW PIN CHAIN 10'
SKU Part No: C2082HP IDC
Manufacturer Part No: IDC C2082HP
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC C2082HP

IDC Select Hollow Pin Conveyor Chain

Manufactured to ANSI/ASME B29.27 Standards

Features

  • Cross Rods Can be Installed at Every Link Without Disassembly
  • ANSI Single- and Double-Pitch Chains Available

Alternative Part Numbers: C2082HPIDC, IDCC2082HP
Unit of Measure: FT
Package Quantity: 10

Catalog Page

IDC Select Chain & Sprocket Catalog

Product Attributes

DescriptionHOLLOW PIN CHAIN 10'
Dim. P Pitch (in)2
Dim. d1 Bushing Diameter max (in)1.13
Dim. b1 Width Between Inner Plates (in)0.62
Dim. d2 Pin Diameter max (in)0.45
Dim. d3 Pin Diameter min (in)0.32
Dim. L Pin Length max (in)1.28
Dim Lc Pin Length max (in)1.33
Dim. h2 Inner Plate Depth max (in)0.94
Dim. T Plate Thickness max (in)0.13
Dim. Q Ultimate Tensile Strength (lb)11364
Dim. Qo Average Tensile Strength (lb)11819.86
Weight per unit (lb)1.9
Selling Unit of measureFT

L150-1-7/16K, JAW TYPE COUPLING-FINISHED BORE

Picture of L150-1-7/16K, JAW TYPE COUPLING-FINISHED BORE
L150-1-7/16K, JAW TYPE COUPLING-FINISHED BORE SETSCREW-AND KEYWAY
SKU Part No: L150-1-7/16K IDC
Manufacturer Part No: IDC L150-1-7/16K
In-Stock Quantity: 31 in stock
Price:

Description

IDC L150-1-7/16K

IDC Select Jaw Coupling Hub

L Type

Features

  • Industry Standard
  • Failsafe - Works even if elastomer fails
  • Available Plain & Finished Bore
  • Inserts available in NBR Rubber, Hytrel, Urethane, and Bronze
  • Complete Coupling consists of 2 Hubs and 1 Insert

Alternative Part Numbers: L1501716KIDC, IDCL1501716K
Unit of Measure: EA
Package Quantity: 1

Dimensions

Product Attributes

DescriptionJaw Type Coupling-Finished Bore
Additional DescriptionKeyway and Setscrew
Bore Size (in)1-7/16
Keyway (in)3/8 X 3/16
OD (in)3.75
Hub Length (in)1.752
Jaw Length (in)0.94
Overall Hub Length (in)2.692
Number of Jaws3
Weight (lb)3.6

1605 2RS, EXTRA LIGHT SERIES

Picture of 1605 2RS, EXTRA LIGHT SERIES
1605 2RS, EXTRA LIGHT SERIES
SKU Part No: 1605 2RS IDC
Manufacturer Part No: IDC 1605 2RS
In-Stock Quantity: 807 in stock
Price:

Description

IDC 1605 2RS

1600 Series Radial Ball Bearing

Extra Light Duty Inch Series

Features

  • Available Sealed or Shielded
  • C3 Radial Internal Clearance
  • ABEC 1 Precision

Alternative Part Numbers: IDC16052RS, 16052RSIDC
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore d (in)0.3125
OD D (in)0.9062
Width B (in)0.3125
Basic Dynamic Load Rating (lb)935
Basic Static Load Rating (lb)390
Weight (lb)0.026
Closure2 Rubber Seals
LubricantMobil Polyrex EM or Chevron SRI #2
MaterialSAE-52100 Chromium Steel

PE324T40-4-3B, 40HP, 1800, 324T, 3P/208-230/460V (S)

Picture of PE324T40-4-3B, 40HP, 1800, 324T, 3P/208-230/460V (S)
PE324T40-4-3B, 40HP, 1800, 324T, 3P/208-230/460V (S) NEMA B-PREMIUM EFFICIENT MOTOR-1800 RPM TEFC FOOTED
SKU Part No: PE324T40-4-3B IDC
Manufacturer Part No: IDC PE324T40-4-3B
In-Stock Quantity: 6 in stock
Price:

Description

IDC PE324T40-4-3B

IDC Select Premium Efficient Cast Iron Motor

Footed, TEFC, NEMA B Design

Features

  • IP55 Rating - Class F Insulation VPI Epoxy Resin Protection
  • Inverted Rated 10:1 CT and 20:1 VT
  • Double-Sealed Bearings
  • Regreasable Bearings on 284T Frame and Larger
  • Cast Iron Conduit Box, Double-Punched Foot, Steel Fan Cover
  • High-Grade Silica Electrical Steel Core and Rotor with Extremely Low Core Losses
  • Shaft and Key Protected with Plastic Cover

Alternative Part Numbers: PE324T4043BIDC, IDCPE324T4043B
Unit of Measure: EA
Package Quantity: 1

Specifications

IDC Select Electric Motors Catalog

Product Attributes

Description40HP,1800, 324T, 3P/208-230/460V (S)
DescriptionNEMA B-PREMIUM EFFICIENT MOTOR-1800 RPM TEFC FOOTED
HP40
Synchronous Speed1800
Frame324T
EnclosureTEFC
Frame MaterialCast Iron
Voltage208-230/460V
Phase3
Frequency60 Hz
Full Load Efficiency (%)94.1
Full Load Amps48.3
Approximate Weight (lb)705
CommentWeight is Product Weight Only, Additional Packaging/Crating May be Required for Transportation

AK114-1-3/16, BORED TO SIZE SHEAVE

Picture of AK114-1-3/16, BORED TO SIZE SHEAVE
AK114-1-3/16, BORED TO SIZE SHEAVE
SKU Part No: AK114-1-3/16 IDC
Manufacturer Part No: IDC AK114-1-3/16
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC AK114-1-3/16

IDC Select Bored-to-Size Sheave

Use with "3L," "4L" & "A" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Set Screws
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: AK1141316 IDC, IDC AK1141316
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1-3/16
Outside Diameter (in)11.25
Pitch Diameter with 3L Belt (in)10.66
Pitch Diameter with 4L or A Belt (in)11
Type3
Face Width Dim. F (in)3/4
Length Through Bore Dim. L (in)1-15/32
Hub Extension Dim. P (in)23/32
Hub Inset Dim. C (in)0
Stock Bores Available3/4, 1, 1-3/16, 1-7/16
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws

BK025-1, BORED TO SIZE SHEAVE

Picture of BK025-1, BORED TO SIZE SHEAVE
BK025-1, BORED TO SIZE SHEAVE
SKU Part No: BK025-1 IDC
Manufacturer Part No: IDC BK025-1
In-Stock Quantity: Out of Stock - product on backorder
Price:

Description

IDC BK025-1

IDC Select Bored-to-Size Sheave

Use with "4L" or "A" Belts and "5L" or "B" Belts

Features

  • Precision Machined from Gray Cast Iron
  • Statically Balanced
  • Baked Enamel Finish
  • Furnished with Standard Keyways and Setscrews
  • Cast Iron Sheaves Should Not Exceed 6500 FPM Rim Speed.
  • Special or Dynamic Balancing Should be Considered when Speeds Exceed 5000 FPM.

Alternative Part Numbers: BK0251 IDC, IDC BK0251
Unit of Measure: EA
Package Quantity: 1

Product Attributes

Bore Size (in)1
Outside Diameter (in)2.5
Pitch Diameter with 4L Belt (in)1.9
Pitch Diameter with 5L or B Belt (in)2.3
Type1
Face Width Dim. F (in)13/16
Length Through Bore Dim. L (in)1-1/16
Hub Extension Dim. P (in)13/32
Hub Inset Dim. C (in)5/32
Stock Bores Available1/2, 5/8, 3/4, 7/8, 1
CommentMachined from Gray Cast Iron, Statically Balanced, Baked Enamel Finish, Individually Packaged, Furnished with Standard Keyway and Set Screws
info@bearserco.com
1-800-458-9318
318-424-1447
Store
Order Policy
Refunds & Returns Policy
FAQs
Supplier Information
General Information
Terms & Conditions
Support
Admin - Bearing Service & Supply
Technical - NEXTStep Commerce
Copyright ©2025 Bearing Service & Supply, Inc. All rights reserved.